Sponsored Links

Jumat, 24 November 2017

Sponsored Links

Adhesive - Wikipedia
src: upload.wikimedia.org

Adhesive may be used interchangeably with glue, cement, mucilage, or paste, and is any substance applied to one surface, or both surfaces, of two separate items that binds them together and resists their separation. Adjectives may be used in conjunction with the word "adhesive" to describe properties based on the substance's physical or chemical form, the type of materials joined, or conditions under which it is applied.

The use of adhesives offers many advantages over binding techniques such as sewing, mechanical fastening, thermal bonding, etc. These include the ability to bind different materials together, to distribute stress more efficiently across the joint, the cost effectiveness of an easily mechanized process, an improvement in aesthetic design, and increased design flexibility. Disadvantages of adhesive use include decreased stability at high temperatures, relative weakness in bonding large objects with a small bonding surface area, and greater difficulty in separating objects during testing. Adhesives are typically organized by the method of adhesion. These are then organized into reactive and non-reactive adhesives, which refers to whether the adhesive chemically reacts in order to harden. Alternatively they can be organized by whether the raw stock is of natural or synthetic origin, or by their starting physical phase.

Adhesives may be found naturally or produced synthetically. The earliest human use of adhesive-like substances was approximately 200,000 years ago, when Neanderthals produced tar from the dry distillation of birch bark for use in binding stone tools to wooden handles.The first references to adhesives in literature first appeared in approximately 2000 BCE. The Greeks and Romans made great contributions to the development of adhesives. In Europe, glue was not widely used until the period 1500-1700 CE. From then until the 1900s increases in adhesive use and discovery were relatively gradual. Only since the last century has the development of synthetic adhesives accelerated rapidly, and innovation in the field continues to the present.


Video Adhesive



History

The earliest use of adhesives was discovered in central Italy when two stone flakes partially covered with birch-bark tar and a third uncovered stone from the Middle Pleistocene era (circa 200,000 years ago) were found. This is thought to be the oldest discovered human use of tar-hafted stones.

The birch-bark-tar adhesive is a simple, one-component adhesive. Although sticky enough, plant-based adhesives are brittle and vulnerable to environmental conditions. The first use of compound adhesives was discovered in Sibudu, South Africa. Here, 70,000-year-old stone segments that were once inserted in axe hafts were discovered covered with an adhesive composed of plant gum and red ochre (natural iron oxide) as adding ochre to plant gum produces a stronger product and protects the gum from disintegrating under wet conditions. The ability to produce stronger adhesives allowed middle stone age humans to attach stone segments to sticks in greater variations, which led to the development of new tools.

More recent examples of adhesive use by prehistoric humans have been found at the burial sites of ancient tribes. Archaeologists studying the sites found that approximately 6,000 years ago the tribesmen had buried their dead together with food found in broken clay pots repaired with tree resins. Another investigation by archaeologists uncovered the use of bituminous cements to fasten ivory eyeballs to statues in Babylonian temples dating to approximately 4000 BCE.

In 2000, a paper revealed the discovery of a 5,200-year-old man nicknamed the "Tyrolean Iceman" or "Ötzi", who was preserved in a glacier near the Austria-Italy border. Several of his belongings were found with him including two arrows with flint arrowheads and a copper hatchet, each with evidence of organic glue used to connect the stone or metal parts to the wooden shafts. The glue was analyzed as pitch, which requires the heating of tar during its production. The retrieval of this tar requires a transformation of birch bark by means of heat, in a process known as pyrolysis.

The first references to adhesives in literature first appeared in approximately 2000 BCE. Further historical records of adhesive use are found from the period spanning 1500-1000 BCE. Artifacts from this period include paintings depicting wood gluing operations and a casket made of wood and glue in King Tutankhamun's tomb. Other ancient Egyptian artifacts employ animal glue for bonding or lamination. Such lamination of wood for bows and furniture is thought to have extended their life and was accomplished using casein (milk protein)-based glues. The ancient Egyptians also developed starch-based pastes for the bonding of papyrus to clothing and a plaster of Paris-like material made of calcined gypsum.

From 1 to 500 AD the Greeks and Romans made great contributions to the development of adhesives. Wood veneering and marquetry were developed, the production of animal and fish glues refined, and other materials utilized. Egg-based pastes were used to bond gold leaves incorporated various natural ingredients such as blood, bone, hide, milk, cheese, vegetables, and grains. The Greeks began the use of slaked lime as mortar while the Romans furthered mortar development by mixing lime with volcanic ash and sand. This material, known as pozzolanic cement, was used in the construction of the Roman Colosseum and Pantheon. The Romans were also the first people known to have used tar and beeswax as caulk and sealant between the wooden planks of their boats and ships.

In Central Asia, the rise of the Mongols in approximately 1000 AD can be partially attributed to the good range and power of the bows of Genghis Khan's hordes. These bows were constructed with laminated lemonwood and bullhorn bonded by an unknown adhesive.

In Europe, glue fell into disuse until the period 1500-1700 AD. At this time, world-renowned cabinet and furniture makers such as Thomas Chippendale and Duncan Phyfe began to use adhesives to hold their products together.

The development of modern adhesives began in 1690 with the founding of the first commercial glue plant in Holland. This plant produced glues from animal hides.

In 1750, the first British glue patent was issued for fish glue. The following decades of the next century witnessed the manufacture of casein glues in German and Swiss factories. In 1876, the first US patent (number 183,024) was issued to the Ross brothers for the production of casein glue.

The first US postage stamps used starch-based adhesives when issued in 1840. The first US patent (number 61,991) on dextrin (a starch derivative) adhesive was issued in 1867.

Natural rubber was first used as material for adhesives starting in 1830. In 1839, Charles Goodyear discovered that a rubber and sulfur mixture, when heated, becomes elastic. In 1843, Thomas Hancock named this process vulcanization. In 1862, a British patent (number 3288) was issued for the plating of metal with brass by electrodeposition to obtain a stronger bond to rubber. The development of the automobile and the need for rubber shock mounts required stronger and more durable bonds of rubber and metal. This spurred the development of cyclized rubber treated in strong acids. By 1927, this process was used to produce solvent-based thermoplastic rubber cements for metal to rubber bonding.

Natural rubber-based sticky adhesives were first used on a backing by Henry Day (US Patent 3,965) in 1845. Later these kinds of adhesives were used in cloth backed surgical and electric tapes. By 1925, the pressure-sensitive tape industry was born. Today, sticky notes, Scotch tape, and other tapes are examples of PSA (pressure-sensitive adhesives).

A key step in the development of synthetic plastics was the introduction of a thermoset plastic known as Bakelite phenolic in 1910. Within two years, phenolic resin was applied to plywood as a coating varnish. In the early 1930s, phenolics gained importance as adhesive resins.

The 1920s, 1930s, and 1940s witnessed great advances in the development and production of new plastics and resins due to the First and Second World Wars. These advances greatly improved the development of adhesives by allowing the use of newly developed materials that exhibited a variety of properties. With changing needs and ever evolving technology, the development of new synthetic adhesives continues to the present. However, due to their low cost, natural adhesives are still more commonly used.


Maps Adhesive



Economic importance

In the course of time and during their development, adhesives have gained a stable position in an increasing number of production processes. There is hardly any product in our surroundings that does not contain at least one adhesive--be it the label on a beverage bottle, protective coatings on automobiles, or profiles on window frames. Market researchers forecast a turnover of almost US$50 billion for the global adhesives market in 2019. In particular, the economic development of emerging countries such as China, India, Russia, and Brazil will cause a rising demand for adhesives in the future.


Loctite 9 fl. oz. Power Grab Express Heavy Duty Construction ...
src: images.homedepot-static.com


Types

Adhesives are typically organized by the method of adhesion. These are then organized into reactive and non-reactive adhesives, which refers to whether the adhesive chemically reacts in order to harden. Alternatively they can be organized by whether the raw stock is of natural, or synthetic origin, or by their starting physical phase.

By reactiveness

Non-reactive

Drying

There are two types of adhesives that harden by drying: solvent-based adhesives and polymer dispersion adhesives, also known as emulsion adhesives. Solvent-based adhesives are a mixture of ingredients (typically polymers) dissolved in a solvent. White glue, contact adhesives and rubber cements are members of the drying adhesive family. As the solvent evaporates, the adhesive hardens. Depending on the chemical composition of the adhesive, they will adhere to different materials to greater or lesser degrees.

Polymer dispersion adhesives are milky-white dispersions often based on polyvinyl acetate (PVAc). They are used extensively in the woodworking and packaging industries. They are also used with fabrics and fabric-based components, and in engineered products such as loudspeaker cones.

Pressure-sensitive

Pressure-sensitive adhesives (PSA) form a bond by the application of light pressure to marry the adhesive with the adherend. They are designed to have a balance between flow and resistance to flow. The bond forms because the adhesive is soft enough to flow (i.e., "wet") to the adherend. The bond has strength because the adhesive is hard enough to resist flow when stress is applied to the bond. Once the adhesive and the adherend are in close proximity, molecular interactions, such as van der Waals forces, become involved in the bond, contributing significantly to its ultimate strength.

PSAs are designed for either permanent or removable applications. Examples of permanent applications include safety labels for power equipment, foil tape for HVAC duct work, automotive interior trim assembly, and sound/vibration damping films. Some high performance permanent PSAs exhibit high adhesion values and can support kilograms of weight per square centimeter of contact area, even at elevated temperatures. Permanent PSAs may initially be removable (for example to recover mislabeled goods) and build adhesion to a permanent bond after several hours or days.

Removable adhesives are designed to form a temporary bond, and ideally can be removed after months or years without leaving residue on the adherend. Removable adhesives are used in applications such as surface protection films, masking tapes, bookmark and note papers, barcodes labels, price marking labels, promotional graphics materials, and for skin contact (wound care dressings, EKG electrodes, athletic tape, analgesic and transdermal drug patches, etc.). Some removable adhesives are designed to repeatedly stick and unstick. They have low adhesion, and generally cannot support much weight. Pressure-sensitive adhesive is used in Post-it notes.

Pressure-sensitive adhesives are manufactured with either a liquid carrier or in 100% solid form. Articles are made from liquid PSAs by coating the adhesive and drying off the solvent or water carrier. They may be further heated to initiate a cross-linking reaction and increase molecular weight. 100% solid PSAs may be low viscosity polymers that are coated and then reacted with radiation to increase molecular weight and form the adhesive, or they may be high viscosity materials that are heated to reduce viscosity enough to allow coating, and then cooled to their final form. Major raw material for PSA's are acrylate-based polymers.

Contact

Contact adhesives are used in strong bonds with high shear-resistance like laminates, such as bonding Formica to a wooden counter, and in footwear, as in attaching outsoles to uppers.

Natural rubber and polychloroprene (Neoprene) are commonly used contact adhesives. Both of these elastomers undergo strain crystallization. In the construction industry a specialised proprietary adhesive known as "liquid nails" is used. This also copes with tasks such as sealing artificial turf.

Contact adhesives must be applied to both surfaces and allowed some time to dry before the two surfaces are pushed together. Some contact adhesives require as long as 24 hours to dry before the surfaces are to be held together. Once the surfaces are pushed together, the bond forms very quickly. It is usually not necessary to apply pressure for a long time, so there is less need for clamps.

Hot

Hot adhesives, also known as hot melt adhesives, are thermoplastics applied in molten form (in the 65-180 °C range) which solidify on cooling to form strong bonds between a wide range of materials. Ethylene-vinyl acetate-based hot-melts are particularly popular for crafts because of their ease of use and the wide range of common materials they can join. A glue gun (shown at right) is one method of applying hot adhesives. The glue gun melts the solid adhesive, then allows the liquid to pass through its barrel onto the material, where it solidifies.

Thermoplastic glue may have been invented around 1940 by Procter & Gamble as a solution to the problem that water-based adhesives, commonly used in packaging at that time, failed in humid climates, causing packages to open.

Reactive

Multi-part

Multi-component adhesives harden by mixing two or more components which chemically react. This reaction causes polymers to cross-link into acrylics, urethanes, and epoxies - See thermosetting polymers.

There are several commercial combinations of multi-component adhesives in use in industry. Some of these combinations are:

  • Polyester resin - polyurethane resin
  • Polyols - polyurethane resin
  • Acrylic polymers - polyurethane resins

The individual components of a multi-component adhesive are not adhesive by nature. The individual components react with each other after being mixed and show full adhesion only on curing. The multi-component resins can be either solvent-based or solvent-less. The solvents present in the adhesives are a medium for the polyester or the polyurethane resin. The solvent is dried during the curing process.

Pre-mixed and frozen adhesives

Pre-mixed and frozen adhesives (PMFs) are adhesives that are mixed, deaerated, packaged, and frozen. As it is necessary for PMFs to remain frozen before use, once they are frozen at -80 °C they are shipped with dry ice and are required to be stored at or below -40 °C. PMF adhesives eliminate mixing mistakes by the end user and reduce exposure of curing agents that can contain irritants or toxins. PMFs were introduced commercially in the 1960s and are commonly used in aerospace and defense.

One-part

One-part adhesives harden via a chemical reaction with an external energy source, such as radiation, heat, and moisture.

Ultraviolet (UV) light curing adhesives, also known as light curing materials (LCM), have become popular within the manufacturing sector due to their rapid curing time and strong bond strength. Light curing adhesives can cure in as little as a second and many formulations can bond dissimilar substrates (materials) and withstand harsh temperatures. These qualities make UV curing adhesives essential to the manufacturing of items in many industrial markets such as electronics, telecommunications, medical, aerospace, glass, and optical. Unlike traditional adhesives, UV light curing adhesives not only bond materials together but they can also be used to seal and coat products. They are generally acrylic-based.

Heat curing adhesives consist of a pre-made mixture of two or more components. When heat is applied the components react and cross-link. This type of adhesive includes thermoset epoxies, urethanes, and polyimides.

Moisture curing adhesives cure when they react with moisture present on the substrate surface or in the air. This type of adhesive includes cyanoacrylates and urethanes.

By origin

Natural

Natural adhesives are made from organic sources such as vegetable starch (dextrin), natural resins, or animals (e.g. the milk protein casein and hide-based animal glues). These are often referred to as bioadhesives.

One example is a simple paste made by cooking flour in water. Starch-based adhesives are used in corrugated board and paper sack production, paper tube winding, and wallpaper adhesives. Casein glue is mainly used to adhere glass bottle labels. Animal glues have traditionally been used in bookbinding, wood joining, and many other areas but now are largely replaced by synthetic glues except in specialist applications like the production and repair of stringed instruments. Albumen made from the protein component of blood has been used in the plywood industry. Masonite, a wood hardboard, was originally bonded using natural wood lignin, an organic polymer, though most modern particle boards such as MDF use synthetic thermosetting resins.

Synthetic

Synthetic adhesives are based on elastomers, thermoplastics, emulsions, and thermosets. Examples of thermosetting adhesives are: epoxy, polyurethane, cyanoacrylate and acrylic polymers. The first commercially produced synthetic adhesive was Karlsons Klister in the 1920s.


Adhesive Foam - VEX Robotics
src: www.vexrobotics.com


Application

Applicators of different adhesives are designed according to the adhesive being used and the size of the area to which the adhesive will be applied. The adhesive is applied to either one or both of the materials being bonded. The pieces are aligned and pressure is added to aid in adhesion and rid the bond of air bubbles.

Common ways of applying an adhesive include brushes, rollers, using films or pellets, spray guns and applicator guns (e.g., caulk gun). All of these can be used manually or automated as part of a machine.


3M 17.6 oz. High-Strength 90 Spray Adhesive-90-24 - The Home Depot
src: images.homedepot-static.com


Mechanisms of adhesion

For an adhesive to be effective it must have three main properties. It must be able to wet the substrate. It must harden [note: not all adhesives harden] and finally it must be able to transmit load between the two surfaces/substrates being adhered.

Adhesion, the attachment between adhesive and substrate may occur either by mechanical means, in which the adhesive works its way into small pores of the substrate, or by one of several chemical mechanisms. The strength of adhesion depends on many factors, including the means by which it occurs.

In some cases, an actual chemical bond occurs between adhesive and substrate. In others, electrostatic forces, as in static electricity, hold the substances together. A third mechanism involves the van der Waals forces that develop between molecules. A fourth means involves the moisture-aided diffusion of the glue into the substrate, followed by hardening.


3M™ Super Strength Adhesive : TAP Plastics
src: www.tapplastics.com


Methods to improve adhesion

The quality of adhesive bonding depends strongly on the ability of the adhesive to efficiency cover (wet) the substrate area. This happens when the surface energy of the substrate is greater than the surface energy of the adhesive. However, high strength adhesives have high surface energy. Thus, their application is problematic for low energy materials such as polymers. To solve this problem, surface treatment can be used to increase the surface energy as a preparation step before adhesive bonding. Importantly, surface preparation provides a reproducible surface allowing consistent bonding results. The commonly used surface activation techniques include plasma activation, flame treatment and wet chemistry priming.


Krylon® All-Purpose Spray Adhesive
src: img.michaels.com


Failure

There are several factors that could contribute to the failure of two adhered surfaces. Sunlight and heat may weaken the adhesive. Solvents can deteriorate or dissolve adhesive. Physical stresses may also cause the separation of surfaces. When subjected to loading, debonding may occur at different locations in the adhesive joint. The major fracture types are the following:

Cohesive fracture

Cohesive fracture is obtained if a crack propagates in the bulk polymer which constitutes the adhesive. In this case the surfaces of both adherends after debonding will be covered by fractured adhesive. The crack may propagate in the center of the layer or near an interface. For this last case, the cohesive fracture can be said to be "cohesive near the interface".

Adhesive fracture

Adhesive fracture (sometimes referred to as interfacial fracture) is when debonding occurs between the adhesive and the adherend. In most cases, the occurrence of adhesive fracture for a given adhesive goes along with smaller fracture toughness.

Other types of fracture

Other types of fracture include:

  • The mixed type, which occurs if the crack propagates at some spots in a cohesive and in others in an interfacial manner. Mixed fracture surfaces can be characterised by a certain percentage of adhesive and cohesive areas.
  • The alternating crack path type which occurs if the cracks jump from one interface to the other. This type of fracture appears in the presence of tensile pre-stresses in the adhesive layer.
  • Fracture can also occur in the adherend if the adhesive is tougher than the adherend. In this case, the adhesive remains intact and is still bonded to one substrate and remnants of the other. For example, when one removes a price label, the adhesive usually remains on the label and the surface. This is cohesive failure. If, however, a layer of paper remains stuck to the surface, the adhesive has not failed. Another example is when someone tries to pull apart Oreo cookies and all the filling remains on one side; this is an adhesive failure, rather than a cohesive failure.

Cohesive and Adhesive Forces - YouTube
src: i.ytimg.com


Design of adhesive joints

As a general design rule, the material properties of the object need to be greater than the forces anticipated during its use. (i.e. geometry, loads, etc.). The engineering work will consist of having a good model to evaluate the function. For most adhesive joints, this can be achieved using fracture mechanics. Concepts such as the stress concentration factor and the strain energy release rate can be used to predict failure. In such models, the behavior of the adhesive layer itself is neglected and only the adherents are considered.

Failure will also very much depend on the opening mode of the joint.

  • Mode I is an opening or tensile mode where the loadings are normal to the crack.
  • Mode II is a sliding or in-plane shear mode where the crack surfaces slide over one another in direction perpendicular to the leading edge of the crack. This is typically the mode for which the adhesive exhibits the highest resistance to fracture.
  • Mode III is a tearing or antiplane shear mode.

As the loads are usually fixed, an acceptable design will result from combination of a material selection procedure and geometry modifications, if possible. In adhesively bonded structures, the global geometry and loads are fixed by structural considerations and the design procedure focuses on the material properties of the adhesive and on local changes on the geometry.

Increasing the joint resistance is usually obtained by designing its geometry so that:

  • The bonded zone is large
  • It is mainly loaded in mode II
  • Stable crack propagation will follow the appearance of a local failure.

Roberts 4 Gal. Multi-Purpose Carpet and Sheet Vinyl Adhesive-3000 ...
src: images.homedepot-static.com


Shelf life

Some glues and adhesives have a limited shelf life. Exposure to heat, oxygen, water vapor, etc. can degrade the adhesive over time, preventing it from functioning properly.


Shop LIQUID NAILS Off-white Interior/Exterior Multi-purpose ...
src: mobileimages.lowes.com


See also

  • Adhesive surface forces
  • Blu-Tack
  • Glue stick
  • Sealant
  • Wood glue
  • Adhesive Tape

Quikrete 1 Qt. Bonding Adhesive-990214 - The Home Depot
src: images.homedepot-static.com


References

Bibliography

  • Ebnesajjad, Sina (2010). "History of Adhesives". Handbook of Adhesives and Surface Preparation:Technology, Applications and Manufacturing. Amsterdam: Elsevier. ISBN 9781437744613.
  • Kinloch, Anthony J. (1987). Adhesion and Adhesives: Science and Technology. London: Chapman and Hall. ISBN 041227440X
  • Lau, John H.; Wong, C. P.; Lee, Ning-Cheng; Lee, S. W. Ricky (2002). Electronics Manufacturing: With Lead-free, Halogen-free, and Conductive-adhesive Materials. McGraw-Hill Professional. ISBN 978-0-07-138624-1. 
  • Mittal, K.L., A. Pizzi (2003). Handbook of Adhesive Technology. New York: Marcel Dekker. ISBN 0824709861
  • Todd, Robert H.; Allen, Dell K.; Alting, Leo (1994). Manufacturing Processes Reference Guide. Industrial Press Inc. ISBN 0-8311-3049-0. 

Shop GE 10.1-fl oz Silicone Multipurpose Adhesive at Lowes.com
src: mobileimages.lowes.com


External links

  • Web dedicated about adhesive science
  • Educational portal on adhesives and sealants
  • RoyMech: The theory of adhesive bonding
  • 3M's Adhesive & Tapes Classification
  • Database of adhesives for attaching different materials
  • Adhesive Formulations

Source of the article : Wikipedia

Comments
0 Comments